Skip to content

Blake Stewart

@blake

  • Friends: 0
  • Followers: 0
  • Following: 0

Posts

  • Unveiling the Enigmatic Olm: Life in the Darkness of Caves

    2024-05-02

    Introducing olms, fascinating subterranean amphibians also known as blind cave salamanders. These remarkable creatures dwell exclusively in the dark depths of caves, up to a thousand feet underground, in central and southern Europe. They inhabit karsts, intricate cave systems created by water erosion of rocks like limestone. Within their subterranean abodes, olms thrive in consistent temperatures, typically between 46 and 52 degrees Fahrenheit. Despite their seemingly delicate appearance, olms possess unique adaptations. While their eyes are vestigial, covered by skin, they have bright red external gills and can darken their skin upon exposure to light. These adaptations suggest they are not albinistic, as previously believed. Additionally, darker variants of olms exist, previously classified as a subspecies but now contested. These darker individuals tend to have shorter heads and reside closer to the cave’s surface. One remarkable feature of olms is the variation in their toe count. Their front feet have three toes, while their back feet have only two. Interestingly, the pale individuals exhibit translucent undersides, similar to glass frogs, allowing researchers to easily determine their sex. While olms lack natural predators, they face threats from habitat loss and pollution. The paler olms reach a maximum length of 10 inches, while their darker counterparts can grow up to 16 inches. Despite their size, olms have an incredibly low metabolic rate and efficient fat storage, allowing them to remain inactive and consume little food for extended periods.

    • #wildlife
    • #naturedocumentaries
    • #animalfacts
    • #olms
    • #blindcavesalamanders
    • #subterraneanamphibians
    • #cavedwellers
    • #karsts
    • #neotenous
    • #longlivedamphibians
  • Emergency Approach and Landing: A Critical Skill for Every Pilot

    2024-04-27

    In the realm of aviation, mastering emergency maneuvers is paramount for ensuring the safety of both the aircraft and its occupants. Among these maneuvers, learning how to execute an emergency approach and landing is crucial, not as a means to enhance other flight techniques, but rather as an essential safeguard against the unlikely event of a complete or partial engine failure during flight. The significance of proficiently executing this maneuver cannot be overstated, as it empowers pilots with the knowledge and skills to safely return the aircraft to the ground, minimizing the risk of catastrophic outcomes. Beyond the technical aspects of flying the aircraft, the ability to recognize the situation, maintain composure, evaluate options, and apply sound aeronautical decision-making can make the difference between a controlled landing and a tragic incident. To effectively perform an emergency approach and landing, several key principles must be kept in mind. Firstly, it is imperative to assume that the engine will not be restarted, dedicating efforts towards identifying a suitable landing site rather than troubleshooting the engine. Secondly, maximizing glide distance becomes paramount, ensuring the aircraft covers the greatest possible distance before touching down. Finally, the selection of a landing area must prioritize safety, minimizing damage to both the aircraft and its surroundings. Many pilots, upon experiencing an engine failure, waste precious time attempting to restart the engine, neglecting the more critical task of establishing a landing plan. This is especially critical at lower altitudes, where time and options may be severely limited. The initial step involves trimming the aircraft for its optimal glide speed, typically 68 knots for a Cessna aircraft at maximum gross weight. With the aircraft trimmed and the flaps retracted, the pilot must assess the situation, determining wind speed and direction while identifying a suitable landing site. Observing ground references and utilizing available information about nearby airports can provide valuable insights into wind conditions. Once the wind factors are established, the task of finding a suitable landing area commences. Ideally, selecting an airport as the landing site is the preferred choice, offering a prepared surface and potential assistance. However, if no airport is within gliding range, identifying an off-airport landing site becomes necessary. This requires an understanding of the aircraft’s glide ratio and factoring in wind effects. As a general rule, a Cessna aircraft exhibits a glide ratio of approximately 1.5:1, meaning it can glide one and a half miles for every thousand feet of altitude. This ratio, however, is subject to wind conditions, necessitating careful judgment in selecting a landing area that takes into account the prevailing winds. When selecting an off-airport landing site, surface conditions play a significant role. Long, hard surfaces, such as runways or roadways, are ideal but may not always be readily available. The next best option is a smooth grass field, whether it be an airport with a grass strip or a well-maintained sod farm. However, if neither of these options is available, farm fields can also be considered, with pastures being preferable to crop fields due to the absence of furrows. In situations where multiple fields are available, factors such as field size, obstacles, and wind direction should influence the final selection. Additionally, it is wise to consider the possibility of having to switch to an alternate field during the approach. Once a landing site has been selected, the next step involves determining the approach strategy. Aiming to mimic the traffic pattern approach, pilots should establish a high key point on the downwind leg at 1,000 feet AGL and a low key point on the base leg at 500 feet AGL. Upon reaching the high key point, flaps should be retracted and extended only when turning base and reaching the…

    • #emergencyprocedures
    • #emergencypreparedness
    • #aviationsafety
    • #generalaviation
    • #pilotskills
    • #emergencyapproachlanding
    • #enginefailuretraining
    • #aircraftemergency
    • #flightmaneuvers
    • #aviationtraining
  • Calibrating the Disto X for Accurate Cave Surveying

    2024-04-17

    To start a Disto X calibration, you’ll need to pair it with a personal digital assistant or PDA. The calibration process must be done with an external device that uses calibration measurements downloaded from the Disto X to calculate calibration coefficients. These coefficients are then uploaded back to the Disto X wirelessly via Bluetooth. Note that calibration cannot be run internally on the Disto X. The first step is to clear any data from the Disto X’s memory. To do this, simultaneously press the ‘auth’ and ‘units’ buttons and hold for two seconds. Afterward, put the Disto X into calibration mode by simultaneously pressing the ‘off’ and ‘smart’ buttons and holding for two seconds. Before starting any calibration, remove anything that might cause interference, such as watches or vertical gear, and move it along with the k-pax away from the calibration area. To begin collecting the 56 calibration readings, look for two rocks, ledges, or other distinctive features that are roughly 10 feet apart and horizontal. You’ll be taking four measurements in each direction—essentially a set of front sights and back sights. Position the unit on each of its four faces, making sure that it is aligned with the laser shooting along the axis between the two stations. For the next eight calibration readings, find another pair of horizontal stations oriented roughly 90 degrees from the original stations. Take four front sights and four back sights while rotating around each face of the unit. The remaining 40 measurements are less critical, but shooting between fixed points for each target will generally yield better calibration. Once you’ve collected all the measurements, reconnect the Disto X to the PDA via Bluetooth and allow the data to download to the calibration software in Pocket Topo. From the calibration menu, press ‘evaluate.’ The software will calculate the delta value—lower delta values indicate better calibration. Generally, a good calibration has a maximum delta of 0.5. If you achieve a low delta, go to the menu and select ‘upload’ to send the new calibration coefficients back to the Disto X. As a final check on the calibration’s quality, take a front sight and back sight with the unit rotated onto each of its four faces. The total range of measurements when corrected for direction should be no more than about half a degree. If it’s significantly greater, repeat the calibration while ensuring there’s no magnetic interference. Calibrations usually remain valid for up to two months, but it’s a good practice to perform a front sight and back sight check before any new survey.

    • #adventure
    • #exploration
    • #underground
    • #caving
    • #calibration
  • The Secret to Safe Diving: Understanding Air Volume Changes

    2024-04-15

    In this video, we explore the fascinating phenomenon of air volume changes during swimming. Using a plastic bag as an analogy for our lungs, we demonstrate how air behaves at different depths. When we swim down, the air compresses, causing the bag to soften. Conversely, as we ascend, the air expands, filling the bag again. This mirrors the process that occurs within our lungs during free diving, where we maintain a constant volume of air while descending and ascending. However, scuba diving introduces an external air source, which can lead to lung rupture if we breathe in deeply at a certain depth and hold our breath while ascending. The expanding air can cause the lungs to burst, allowing air to leak into the chest cavity. To avoid this hazard, we must exhale continuously while swimming up. This ensures that the air volume in our lungs remains within safe limits. It’s crucial to emphasize the importance of proper training before engaging in scuba diving or any other form of diving. Taking a certification course provides essential knowledge and safety protocols to prevent potential risks. By understanding the principles of air volume changes and adhering to safe diving practices, we can enjoy the wonders of exploring the underwater world.

    • #freediving
    • #safety
    • #training
    • #exploration
    • #marinelife
    • #ocean
    • #scubadiving
    • #aircompression
    • #diving
    • #underwater
  • Unveiling the Secrets of Caves: A Journey into the Darkness

    2024-04-12

    Embark on a subterranean adventure in this program where we delve into the enigmatic world of caves. These natural underground hollows, devoid of light, exist globally in a myriad of sizes and forms. Some boast entrances at the Earth’s surface, while others are submerged in air or water, occasionally both. Caves often harbor sand, mud, clay, and silt, while others are etched into cliffs by relentless ocean waves. Some originate from the cooling and hardening of lava tubes, leaving hollow interiors, but the majority are sculpted by water erosion in limestone. This rock becomes acidic upon contact with water, gradually dissolving and creating caverns. Most limestone caves require millennia to expand sufficiently for human habitation. The Mammoth Cave system in Kentucky stands as the largest and most extensive cave system globally, boasting a staggering 367 miles of subterranean passages. Caves often feature distinctive formations such as stalactites and stalagmites, formed by dripping water depositing hardened minerals. Stalactites descend from the ceiling like icicles, while stalagmites rise from the floor. Caves serve as crucial habitats for a vast array of flora and fauna. Some creatures, like bats, utilize cave entrances as temporary shelters, while others, such as the elusive cave-dwelling insects, spend their entire lives enveloped in darkness. The diversity of cave-dwelling species is staggering, with an estimated 50,000 distinct animal species residing permanently within these subterranean environments, many yet to be discovered.

    • #nature
    • #wildlife
    • #exploration
    • #limestone
    • #caves
    • #geology
    • #underground
    • #stalactites
    • #stalagmites
    • #mammothcave
  • Mastering Cave Lighting: Double Bounce Technique for Stunning Results

    2024-03-26

    In this captivating video, we embark on an exciting commercial shoot, where we bring a mummy-infested cave to life with the help of talented professionals and innovative lighting techniques. Our team sets up shop at the historic L.A. Zoo to showcase a unique lighting arrangement that allows us to illuminate the talent deep within the cave’s depths. To overcome the challenge of shaded cave openings, we employ a clever double-bounce reflector technique. By strategically placing a reflector in direct sunlight and another one inside the shaded cave, we redirect the natural light around the corner, casting an even glow on our subject. We complement this setup with ambient light bounced through silk and a fill light inside the cave, creating the illusion of a water pool reflecting light onto the back wall. The result is a stunning visual that showcases both our lighting expertise and the creative vision behind the commercial. The video effortlessly combines captivating visuals with valuable technical insights, making it both entertaining and educational. It’s a testament to the power of innovative lighting techniques and the magic that unfolds when professionals collaborate. Don’t miss out on the chance to win one of two portable SpeedLight Kits, generously sponsored by The Slanted Lens. Each kit includes two small OctoDomes, two light stands, two brackets, and two Speedrings. To enter the giveaway or purchase this premium kit with a complimentary Mastery In Strobes digital download, head over to their website, TheSlantedLens.com. Keep those cameras rolling and keep clicking!

    • #behindthescenes
    • #videography
    • #lightingtechniques
    • #cinematography
    • #lightingsetup
    • #lightingdesign
    • #productphotography
    • #cavephotography
    • #creativelighting
    • #lightingtips
  • Capturing the Subterranean: A Guide to Cave Photography

    2024-03-22

    In this video, I delve into the fascinating world of cave photography, sharing my insights gained through years of experience. I emphasize the significance of lighting and the careful positioning of models to capture captivating images that showcase the beauty and grandeur of caves. To achieve stunning cave photographs, I advocate for meticulous planning and attention to detail. I discuss the importance of visualizing the final image, considering the best angles, lighting, and model placement. By employing these techniques, photographers can effectively convey the scale and depth of the subterranean environment. During a recent expedition in Indonesia, I had the opportunity to share my knowledge with a group of Indonesian cavers and my companions from the United States. We conducted a workshop on cave photography, where I covered essential lighting techniques and model positioning. One of the highlights of the workshop was a large-scale group shot in a vast cave chamber. To create a sense of depth and scale in the photograph, we positioned models at varying distances from the camera. This technique effectively conveyed the immense size of the cave and showcased the intricate details of its formations. I encourage fellow cave photographers to embrace experimentation, seek inspiration from other photographers, and continually refine their skills to capture breathtaking images that illuminate the wonders of the subterranean world.

    • #exploration
    • #adventurephotography
    • #naturephotography
    • #travelphotography
    • #indonesia
    • #caveart
    • #lightingtechniques
    • #caving
    • #cavephotography
    • #spelunking
  • Dark Secrets of Caves: Children's Shoes, Trapped Explorers, and Unresolved Mysteries

    2024-03-07

    In the depths of the McCoy Mine, YouTuber Connor Kelly stumbled upon a chilling discovery - a pile of children’s shoes mixed with animal bones. The disturbing sight raised questions about the purpose and origin of this eerie collection. Another haunting cave story unfolds in Nutty Putty Cave, where medical student John Jones met a tragic fate. While exploring a narrow passage, he became wedged upside down, leaving him trapped in agony for over 24 hours. Despite rescue efforts, John’s life was cut short due to the perilous conditions. His body remains entombed within the cave. Curiosity and speculation swirl around the Mallor Cave, owned by the Masonic Lodge of Burns. Rumors of secret rituals and Satanic worship have plagued the site, leading to its closure in 2019. The eerie bleachers lining the cave’s walls add to the mystique and unease surrounding it. In a bizarre twist, YouTuber Kenny Veach vanished after investigating a mysterious cave known as the “M Cave.” Located near a top-secret air base, Kenny reported strange vibrations and an ominous feeling emanating from the cave. His unexplained disappearance has fueled theories of government involvement and extraterrestrial encounters. A YouTuber known as Abandoned Minds 11 later visited the alleged M Cave and discovered items that seemed to support Kenny’s claims. An Area 51 warning sign and discarded materials hinted at a possible connection to a clandestine facility. However, the truth behind Kenny’s fate remains shrouded in mystery. These tales from the depths of caves serve as reminders of the hidden dangers and the unsettling mysteries that lurk beneath the surface. They challenge our understanding of the natural world and leave us with a profound sense of unease and intrigue.

    • #missingpersons
    • #truecrime
    • #caveexploration
    • #paranormalactivity
    • #abandonedplaces
    • #unexplainedmysteries
    • #cavinggonewrong
    • #creepydiscoveries
    • #hauntings
    • #governmentconspiracies
  • Volumetric Lighting and God Rays in Unreal Engine 5: A Quick and Easy Guide

    2024-02-26

    In this video, I’ll guide you through creating stunning volumetric lighting and god rays in Unreal Engine 5. It’s an effortless setup that transforms your virtual worlds in a matter of minutes. Let’s dive into how it’s done! We’ll begin by setting up the lights in our environment. The key elements for this effect are the Skylight with real-time capture enabled, the Atmospheric Light and Fog, and the Sky Atmosphere with Volumetric Clouds. These will provide the foundation for the lighting and atmospheric qualities. Next, we’ll delve into the Directional Lighting settings. Here, you’ll enable Light Shaft Occlusion and Volumetric Fog to achieve the desired volumetric lighting and god rays. By adjusting the density and manipulating the lighting’s rotation, you can control the intensity and direction of these visual elements. If you seek an even more striking effect, consider enabling Light Shaft Bloom, bearing in mind it can be potent and should be used judiciously. With these settings dialed in, you’ll witness your scene come alive with breathtaking volumetric effects.

    • #unrealengine
    • #gamedevelopment
    • #volumetriclighting
    • #vfx
    • #gameart
    • #lightingdesign
    • #rendering
    • #atmosphericeffects
    • #unrealengine5
    • #environmentalart
  • The Art of Digital Landscapes: Procedural Terrain Generation and Modular Design

    2024-02-23

    In the realm of expansive video game landscapes, procedural terrain generation emerges as a revolutionary tool. This technique unleashes the ability to craft colossal worlds teeming with towering mountains, winding rivers, and sprawling grasslands. Artists leverage software that transforms height maps into 3D meshes, allowing them to sculpt these vast environments with ease. Beyond terrain creation, procedural generation extends its wonders to world-building. It can conjure up lifelike ecosystems, evoking vibrant biomes with diverse vegetation and natural phenomena such as flowing rivers and glaciers. The software’s versatility empowers artists to breathe life into entire cities, complete with towering skyscrapers, lush parks, and bustling streets. While procedural generation undoubtedly accelerates the creation process, it also poses a potential pitfall: sameness. However, skilled designers employ modular design to combat this, offering a solution that marries creative freedom with visual harmony. Artists craft themed kits of assets, such as walls, roofs, and towers, which they can seamlessly combine to form unique structures. In games like “Red Dead Redemption,” modular design shines, seamlessly blending mass-produced assets with meticulous hand-crafted details. This hybrid approach empowers teams to rapidly construct expansive towns and cities while maintaining the allure of exploration and discovery. Procedural terrain generation and modular design stand as cornerstones of modern game development, enabling the creation of breathtaking virtual worlds that transport players to realms of boundless imagination.

    • #digitalart
    • #gamedesign
    • #modulardesign
    • #worldbuilding
    • #landscapedesign
    • #gamedevelopment
    • #virtualworlds
    • #environmentart
    • #openworldgames
    • #proceduralterraingeneration
  • #spelunking
  • #cavesafety
  • #cavegear
  • #cavesurveying
  • #cavemapping